GTT Edmonton Summary Notes, Apple Pay and JAWS Built-in Training, September 10, 2018

            Summary Notes

GTT Edmonton Meeting September 10, 2018

 

The most recent meeting of the Get Together with Technology (GTT) Edmonton Chapter was held September 10 at 7pm at Ascension Lutheran Church 8405 83 Street in Edmonton.

22 people attended.

Reading Tip: These summary notes apply HTML headings to help navigate the document. With screen readers, you may press the H key to jump forward or Shift H to jump backward from heading to heading.

 

September Topics –Apple Pay and JAWS Built-in Training

 

Apple Pay on the iPhone

Lorne demonstrated using Apple Pay on his iPhone 8 to pay for items. He had access to a Square wireless card reader for small businesses to accept Apple Pay transactions, which he used to demonstrate purchasing an item using Apple Pay, the same way one would in a store.

 

Apple Pay is a quick, secure and accessible method for making purchases that allow a blind or partially sighted iPhone user to avoid the need to figure out the various layouts of debit/credit pin pads in stores. It works with iPhones going back as far as the iPhone 6, with an Apple Watch, or newer Macs that have the Touch ID fingerprint reader.

Most stores may not know if they support paying for things using Apple Pay, so instead ask if they accept tap cards; if the accept paying with tap, it will accept Apple Pay.

 

Advantages of using Apple Pay verses tap is that it’s more secure, you know for sure which card you’re using, and there will be a record of each transaction, so you can go back and confirm that you were correctly charged.

 

If you’ve set up Apple Pay on your phone, and you hold your phone up very close to the pin pad at a store after the cashier is waiting for you to proceed, the Apple Pay screen will pop up automatically on your iPhone. It will not proceed however, until you type in your pass code or touch your home button with your fingerprint registered with Touch ID. If it does not pop up for any reason, you can bring it up anytime from your lock screen by double tapping the home button and hold after the second tap.

 

Links for More Information

  • A demonstration of setting up Apple Pay from AppleVis, it’s a few years old but most things are similar still:

https://www.applevis.com/podcast/episodes/quick-tip-setting-your-iphone-use-apple-pay

https://support.apple.com/en-ca/HT203027

“Apple doesn’t store or have access to the original credit, debit, or prepaid card numbers that you use with Apple Pay. And when you use Apple Pay with credit, debit, or prepaid cards, Apple doesn’t retain any transaction information that can be traced back to you. Your transactions stay between you, the merchant, and your bank or card issuer. When you add a credit, debit, prepaid, or transit card (where available) to Apple Pay, information that you enter on your device is encrypted and sent to Apple servers. If you use the camera to enter the card information, the information is never saved on your device or photo library. Apple decrypts the data, determines your card’s payment network, and re-encrypts the data with a key that only your payment network (or any providers authorized by your card issuer for provisioning and token services) can unlock.”

 

JAWS Built-in Training Materials

Anthony asked a great question about how to access the built-in training materials that come with JAWS. Many JAWS users forget these DAISY formatted materials are available right on their computer through the FS Reader DAISY book reader that is installed with JAWS. There are two ways to access the FS Reader app either: from your desktop or through the JAWS help menu.

Access JAWS Training from the Desktop

  • Hold down Windows key and press M to reach your desktop.
  • Press key F repeatedly until the icon for the FS Reader app is announced. Then press Enter and the FS Reader app will open.
  • You may hear, FS Reader untitled, meaning there is no current book open to read. Press Alt+F to open the File menu.
  • Press down arrow to read the items in the File menu. The first one is Open which allows you to open and read any DAISY book on your computer regardless of whether it was created by Freedom Scientific. Press down arrow again and you will find the item to open the JAWS Training table of contents. Press Enter to activate this item.
  • You can now arrow up and down the training books in the table of contents. Simply press Enter to read the topics you want. If the selected topic is not installed FS Reader will automatically download it from Freedom Scientific so be sure your computer is connected to the Internet.
  • To get help using the FS Reader itself, simply press F1.

 

Access JAWS Training from the JAWS Help Menu

If you prefer, the training materials may also be accessed through the JAWS menu as follows:

  • Press JAWS key + J to open the JAWS menu.
  • Arrow down to the Help menu and press right arrow to open its submenu.
  • Arrow down to Training and press Enter.
  • FS Reader will open with the JAWS training table of contents already loaded.
  • You can now arrow up and down the training books in the table of contents. Simply press Enter to read the topics you want. If the selected topic is not installed FS Reader will automatically download it from Freedom Scientific so be sure your computer is connected to the Internet.
  • To get help using the FS Reader itself, simply press F1.

 

Next Meeting (Monday October 15 at 7pm)

  • The second Monday of October is Thanksgiving, so we will have our next meeting on the third Monday October 15.
  • As always, for help with technology bring your devices and/or questions to the meeting.

 

Meeting Location and Logistics

  • Ascension Lutheran Church 8405 – 83 Street NW, Edmonton.
  • We meet in the basement hall. There is elevator access.
  • Enter the church from the back door. There is parking at the back and drop off space for taxis, DATS.
  • Meetings are every second Monday of the month at 7pm.
  • If you have someone helping you your assistant is welcome to remain for the meeting.

 

GTT Edmonton Overview

  • GTT Edmonton is a chapter of the Canadian Council of the Blind (CCB).
  • GTT Edmonton promotes a self-help learning experience by holding monthly meetings to assist participants with assistive technology.
  • Each meeting consists of a feature technology topic, questions and answers about technology, and one-on-one training where possible.
  • Participants are encouraged to come to each meeting even if they are not interested in the feature topic because questions on any technology are welcome. The more participants the better able we will be equipped with the talent and experience to help each other.
  • There are GTT groups across Canada as well as a national GTT monthly toll free teleconference. You may subscribe to the National GTT blog to get email notices of teleconferences and notes from other GTT chapters. Visit:

http://www.GTTProgram.blog/

To subscribe, use the form at the bottom of that web page to enter your email.

 

National GTT Email Support List

CCB sponsors a GTT email support list to provide help and support with technology for blind and low vision Canadians.  To subscribe to the email list, send an empty email to:

GTTsupport+subscribe@groups.io

 

[End of Document]

 

 

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.